GIGABYTE Alaplap S1851 Z890 EAGLE WIFI7 INTEL Z890, ATX CPU LGA1851 socket:
Support for IntelŽ Core? Ultra Processors L3 cache varies with CPU * Please
refer to CPU Support List for more information. Chipset IntelŽ Z890
Express Chipset Memory Support for DDR5 8800(O.C) /8600(O.C) / 8400(O.C)
/8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) /
7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) /
6400 / 6200 / 6000 / 5800 / 5600MT/s memory modules. 4 x DDR5 DIMM sockets
supporting up to 256 GB (64 GB single DIMM capacity) of system memory Dual
channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory
modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM
1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory
modules Support CUDIMM memory module (The CPU and memory configuration may
affect the supported memory types, data rate (speed), and number of DRAM
modules, please refer to Memory Support List for more information.) Onboard
Graphics Integrated Graphics Processor-IntelŽ HD Graphics support: - 1 x USB4Ž
USB Type-CŽ port, supporting USB4 and DisplayPort video outputs and a maximum
resolution of 3840x2160@144 Hz * Support for DisplayPort 2.1 version - 1 x
DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz * Support for
DisplayPort 2.1 version (Graphics specifications may vary depending on CPU
support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack using
the audio software. To configure 7.1-channel audio, access the audio software
for audio settings. LAN RealtekŽ 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100
Mbps) Wireless Communication module MediaTek Wi-Fi 7 MT7925 (PCB rev. 1.0)
- 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands
- BLUETOOTH 5.4 - Support for 11be 160MHz wireless standard RealtekŽ Wi-Fi 7
RTL8922AE (PCB rev. 1.1) - 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz
carrier frequency bands - BLUETOOTH 5.4 - Support for 11be 160MHz wireless
standard (Actual data rate may vary depending on environment and equipment.) *
Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no
support driver for Windows 10.) ** Wi-Fi 7 channels on 6 GHz band availability
depends on individual country's regulations. Expansion Slots CPU: - 1 x
PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * The
PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one
graphics card is to be installed, be sure to install it in the PCIEX16 slot.
Chipset: - 2 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4
(PCIEX4_1/2) Storage Interface CPU: - 1 x M.2 connector (Socket 3, M key,
type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU) - 1 x M.2
connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support)
(M2B_CPU) Chipset: - 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe
4.0 x4/x2 SSD support) (M2Q_SB) - 1 x M.2 connector (Socket 3, M key, type
22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) - 4 x SATA 6Gb/s
connectors RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage
devices RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
USB CPU: - 1 x USB4Ž USB Type-CŽ port on the back panel Chipset: - 1 x
USB Type-CŽ port with USB 3.2 Gen 2 support, available through the internal USB
header - 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel - 5 x USB 3.2
Gen 1 ports (3 ports on the back panel, 2 ports available through the internal
USB header) Chipset+2 USB 2.0 Hubs: - 8 x USB 2.0/1.1 ports (4 ports on the
back panel, 4 ports available through the internal USB headers) Internal
I/O Connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power
connectors 1 x CPU fan header 1 x CPU fan/water cooling pump header 3 x
system fan headers 1 x system fan/water cooling pump header 3 x addressable
RGB Gen2 LED strip headers 1 x RGB LED strip header 4 x M.2 Socket 3
connectors 4 x SATA 6Gb/s connectors 1 x front panel header 1 x front panel
audio header 1 x USB Type-CŽ header, with USB 3.2 Gen 2 support 1 x USB 3.2
Gen 1 header 2 x USB 2.0/1.1 headers 2 x Thunderbolt? add-in card connectors
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0/GC-TPM2.0 SPI V2 module only) 1 x power button 1 x Q-Flash Plus button 1
x reset button 1 x reset jumper 1 x Clear CMOS jumper Back Panel
Connectors 1 x USB4Ž USB Type-CŽ port (DisplayPort (Note)) 2 x USB 3.2 Gen 2
Type-A ports (red) 3 x USB 3.2 Gen 1 ports 4 x USB 2.0/1.1 ports 1 x
DisplayPort (Note) 2 x antenna connectors (2T2R) 1 x RJ-45 port 3 x audio
jacks (Note) Actual support may vary by CPU. I/O Controller iTEŽ I/O
Controller Chip H/W Monitoring Voltage detection Temperature detection
Fan speed detection Water cooling flow rate detection Fan fail warning Fan
speed control * Whether the fan (pump) speed control function is supported will
depend on the fan (pump) you install. BIOS 1 x 256 Mbit flash Use of
licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features Support for GIGABYTE Control Center (GCC) * Available
applications in GCC may vary by motherboard model. Supported functions of each
application may also vary depending on motherboard specifications. Support
for Q-Flash Support for Q-Flash Plus Support for Smart Backup Bundled
Software NortonŽ Internet Security (OEM version) LAN bandwidth management
software Operating System Support for Windows 11 64-bit Form Factor
ATX Form Factor; 30.5cm x 24.4cm