GIGABYTE Alaplap S1851 Z890 UD WIFI6E INTEL Z890, ATX CPU LGA1851 socket:
Support for IntelŽ Core? Ultra Processors L3 cache varies with CPU * Please
refer to CPU Support List for more information. Chipset IntelŽ Z890
Express Chipset Memory Support for DDR5 8800(O.C) /8600(O.C) / 8400(O.C)
/8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) /
7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) /
6400 / 6200 / 6000 / 5800 / 5600MT/s memory modules. 4 x DDR5 DIMM sockets
supporting up to 256 GB (64 GB single DIMM capacity) of system memory Dual
channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory
modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM
1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory
modules Support CUDIMM memory module (The CPU and memory configuration may
affect the supported memory types, data rate (speed), and number of DRAM
modules, please refer to Memory Support List for more information.) Onboard
Graphics Integrated Graphics Processor-IntelŽ HD Graphics support: - 1 x USB4Ž
USB Type-CŽ port, supporting USB4 and DisplayPort video outputs and a maximum
resolution of 3840x2160@144 Hz * Support for DisplayPort 2.1 version - 1 x
DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz * Support for
DisplayPort 2.1 version (Graphics specifications may vary depending on CPU
support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack using
the audio software. To configure 7.1-channel audio, access the audio software
for audio settings. LAN RealtekŽ 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100
Mbps) Wireless Communication module IntelŽ Wi-Fi 6E AX211 (PCB rev. 1.0)
- WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands -
BLUETOOTH 5.3 - Support for 11ax 160MHz wireless standard RealtekŽ Wi-Fi 6E
RTL8852CE (PCB rev. 1.1) - WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz
carrier frequency bands - BLUETOOTH 5.3 - Support for 11ax 160MHz wireless
standard (Actual data rate may vary depending on environment and equipment.)
Expansion Slots CPU: - 1 x PCI Express x16 slot, supporting PCIe 5.0 and
running at x16 (PCIEX16) * The PCIEX16 slot can only support a graphics card or
an NVMe SSD. If only one graphics card is to be installed, be sure to install it
in the PCIEX16 slot. Chipset: - 2 x PCI Express x16 slots, supporting PCIe
4.0 and running at x4 (PCIEX4_1, PCIEX4_2) - 1 x PCI Express x16 slot,
supporting PCIe 4.0 and running at x1 (PCIEX1) Storage Interface CPU: - 1 x
M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD
support) (M2A_CPU) - 1 x M.2 connector (Socket 3, M key, type
25110/22110/2580/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU) Chipset: - 1 x M.2
connector (Socket 3, M key, type 25110/22110/2580/2280 SATA and PCIe 4.0 x4/x2
SSD support) (M2M_SB) - 4 x SATA 6Gb/s connectors RAID 0, RAID 1, RAID 5, and
RAID 10 support for NVMe SSD storage devices RAID 0, RAID 1, RAID 5, and RAID
10 support for SATA storage devices USB CPU: - 1 x USB4Ž USB Type-CŽ port
on the back panel Chipset: - 1 x USB Type-CŽ port with USB 3.2 Gen 1 support,
available through the internal USB header - 1 x USB 3.2 Gen 2 Type-A port (red)
on the back panel - 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports
available through the internal USB header) Chipset+2 USB 2.0 Hubs: - 8 x USB
2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal
USB headers) Internal I/O Connectors 1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors 1 x CPU fan header 1 x CPU fan/water
cooling pump header 2 x system fan headers 2 x system fan/water cooling pump
headers 3 x addressable RGB Gen2 LED strip headers 1 x RGB LED strip header 3
x M.2 Socket 3 connectors 4 x SATA 6Gb/s connectors 1 x front panel header 1
x front panel audio header 1 x USB Type-CŽ header, with USB 3.2 Gen 1 support
1 x USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 2 x Thunderbolt? add-in card
connectors 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0
SPI 2.0/ GC-TPM2.0 SPI V2 module only) 1 x serial port header 1 x power button
1 x reset button 1 x Q-Flash Plus button 1 x reset jumper 1 x Clear CMOS
jumper Back Panel Connectors 4 x USB 2.0/1.1 ports 1 x PS/2
keyboard/mouse port 1 x DisplayPort (Note) 4 x USB 3.2 Gen 1 ports 1 x USB4Ž
USB Type-CŽ port (DisplayPort (Note)) 1 x USB 3.2 Gen 2 Type-A port (red) 1 x
RJ-45 port 2 x SMA antenna connectors (2T2R) 3 x audio jacks (Note) Actual
support may vary by CPU. I/O Controller iTEŽ I/O Controller Chip H/W
Monitoring Voltage detection Temperature detection Fan speed detection Water
cooling flow rate detection Fan fail warning Fan speed control * Whether the
fan (pump) speed control function is supported will depend on the fan (pump) you
install. BIOS 1 x 256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a,
DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features Support for
GIGABYTE Control Center (GCC) * Available applications in GCC may vary by
motherboard model. Supported functions of each application may also vary
depending on motherboard specifications. Support for Q-Flash Support for
Q-Flash Plus Support for Smart Backup Bundled Software NortonŽ Internet
Security (OEM version) LAN bandwidth management software Operating System
Support for Windows 11 64-bit Form Factor ATX Form Factor; 30.5cm x
24.4cm