GIGABYTE Alaplap S1700 B760M H DDR4 INTEL B760, mATX CPU LGA1700 socket:
Support for the 13th and 12thGeneration IntelŽ Core?, PentiumŽ Gold and CeleronŽ
Processors L3 cache varies with CPU (Please refer to CPU Support List for more
information.) Chipset IntelŽ B760 Express Chipset Memory Support for
DDR4 3200/3000/2933/2666/2400/2133 MT/s memory modules 2 x DDR4 DIMM sockets
supporting up to 64GB (32 GB single DIMM capacity) of system memory Dual
channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory
modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM
1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory
modules (Please refer Memory Support List for more information.) Onboard
Graphics Integrated Graphics Processor-IntelŽ HD Graphics support: - 1 x D-Sub
port, supporting a maximum resolution of 1920x1200@60 Hz - 1 x HDMI port,
supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI 2.0
version and HDCP 2.3. (Graphics specifications may vary depending on CPU
support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack using
the audio software. To configure 7.1-channel audio, access the audio software
for audio settings. Support for S/PDIF Out LAN RealtekŽ GbE LAN chip (1
Gbps/100 Mbps) Expansion Slots CPU: - 1 x PCI Express x16 slot,
supporting PCIe 4.0 and running at x16 Chipset: - 1 x PCI Express x1 slot,
supporting PCIe 3.0 and running at x1 Storage Interface CPU: - 1 x M.2
connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
Chipset: - 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD
support) (M2P_SB) - 4 x SATA 6Gb/s connectors RAID 0, RAID 1, RAID 5, and RAID
10 support for SATA storage devices USB Chipset: - 6 x USB 3.2 Gen 1
ports (4 ports on the back panel, 2 ports available through the internal USB
header) - 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available
through the internal USB headers) Internal I/O Connectors 1 x 24-pin ATX
main power connector 1 x 8-pin ATX 12V power connector 1 x CPU fan header 2 x
system fan headers 1 x RGB LED strip header 2 x M.2 Socket 3 connectors 4 x
SATA 6Gb/s connectors 1 x front panel header 1 x front panel audio header 1 x
S/PDIF Out header 1 x USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 1 x
Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module
only) 1 x serial port header 1 x Clear CMOS jumper Back Panel Connectors
2 x USB 2.0/1.1 ports 1 x D-Sub port 1 x HDMI port 4 x USB 3.2 Gen 1 ports
1 x RJ-45 port 3 x audio jacks I/O Controller iTEŽ I/O Controller Chip
H/W Monitoring Voltage detection Temperature detection Fan speed detection
Water cooling flow rate detection Fan fail warning Fan speed control *
Whether the fan speed control function is supported will depend on the cooler
you install. BIOS 1 x 128 Mbit flash Use of licensed AMI UEFI BIOS PnP
1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Unique Features Support for
GIGABYTE Control Center (GCC) * Available applications in GCC may vary by
motherboard model. Supported functions of each application may also vary
depending on motherboard specifications. Support for Q-Flash Bundled
Software NortonŽ Internet Security (OEM version) LAN bandwidth management
software Operating System Support for Windows 11 64-bit Support for
Windows 10 64-bit Form Factor Micro ATX Form Factor; 23.0cm x 21.5cm