VIBER 110 The TEMPISH VIBER 110 roller skates combine a freestyle hard shoe
with the speed of large 110mm wheels. A special universal model designed both
for shorter routes in the city and thanks to large wheels also for trails. This
skate is suitable for advanced and experienced skaters. The skate with a hard
skeleton is designed for universal use due to its construction and equipment.
Thanks to the short chassis is ensured easy manoeuvrability. The skate is
equipped with a combination of three wheels with a size of 110mm, thanks to
which it is possible to achieve high speeds when riding. It is also possible to
mount smaller wheels in the chassis (minimum recommended size 90mm). The
skeleton of the skate is well ventilated - ventilation reaches the foot thanks
to a ventilated liner, which contains holes around its entire circumference,
including the tongue. A screw with a special nut and washer is used in the skate
joint, thanks to which the cuff is replaceable and can be tightened if
necessary, it also guarantees a longer service life than the articulated rivet.
The upper metal self-locking buckle has a bend at the end for a better grip. The
strap is inserted into the skeleton so that it does not catch on the second
skate during slalom and freestyle, the buckle itself is protected against damage
by the lower plastic boss. The instep strap is equipped with a single-stage
micro buckle with very comfortable tightening and loosening thanks to the
ratchet system. The plastic protectors on the outside of the skates are
replaceable, as is the instep strap. The holes for the laces are fitted with
strong metal rings for the protection of the laces and better tightening. Thanks
to the use of waxed laces with a width of 10 mm, it is possible to tighten the
laces gradually and to close the skeleton of the skate more effectively. The
skate liner is ventilated, has holes around its entire circumference and
reinforced with PVC at the top. There is an elastic neoprene in the area of the
fingers to increase comfort. In the back, there is a loop with a reflective
strip. Reflective parts are also added on the outside of the skate. In the area
of the Achilles tendon, the liner is lowered and shaped into a V-shape, which
enhances manoeuvrability and mobility, and thus easier execution of freestyle
tricks and moves. The liner has cut-outs in the area of the ankle bend sewn with
elastic neoprene, which achieves optimal anatomical dispositions of the liner
while maintaining its rigidity. The lower part of the liner uses a material that
slides less in the skeleton. The shoe has an anatomical insole with a thickness
of 3mm, which is comfortable enough, yet not too soft. Under the liner in the
heel part, the shock-absorbing silent block made of TPR material, which
perfectly absorbs vibrations and shocks, is fairly thick, soft and comfortable.
The tongue of the liner is sufficiently stiff and thick, it consists of 2 parts,
so it perfectly copies the instep of the foot. The tongue holds the position
well thanks to the use of a drawstring. The chassis made by CNC is strongly
reinforced with a three-dimensional structure, very strong, stable and precise.
The chassis is attached to the shoe with 2 central bolts and 2 robust aluminium
blocks with threads. Thanks to these blocks, the transmission of power is
significantly more efficient. The chassis can be adjusted transversely and
longitudinally. The hollow axles for weight reduction have a diameter of 8mm and
are mounted on the left skate on the inside and on the right skate on the
outside to prevent the screws from loosening while riding. Chassis mounting
dimensions:: 165mm Bearings: quality ABEC-9 chrome with rubber duster for easy
cleaning and maintenance Wheels: PUC, SUPER HI-REBOUND 85A 110*24 mm Size: 37-
45