SkyRC NC2500 Pro AA / AAA töltő SkyRC NC2500 Pro AA / AAA töltő A SkyRC NC2500
Pro töltő nemcsak AA és AAA akkumulátorok töltését teszi lehetővé, hanem azok
regenerálását is. A készülék többféle üzemmódot kínál, és további előnye a
bejáratási funkció, amely lehetővé teszi a régóta nem használt modellmotorok
bejáratását. Van egy USB-portja is, amely támogatja a QC 3.0 gyorstöltést, és a
töltő 6 akkumulátorhellyel rendelkezik. Akár 4 elérhető funkció Az NC2500 Pro 4
működési módot kínál. Így nem csak tölteni, hanem kisütni vagy regenerálni is
tudja a választott akkumulátorokat. Így meghosszabbítod az életüket! Befékező
funkció is elérhető. Mindez lehetővé teszi, hogy optimalizálja akkumulátorai
működését, gondoskodjon állapotukról, sőt megóvja őket a kopástól, sérüléstől!
Töltsön fel 6 akkumulátort egyszerre With the NC2500 Pro you can charge up to 6
batteries simultaneously. The device is equipped with 6 slots and offers a
maximum current of 2.5A. The charger also offers a special Step Charging mode,
which allows you to adjust the amperage for successive charging steps. So you
can take even better care of the condition of your batteries and enjoy their
optimal performance! Easy operation Convenient operation of the device is
enabled by a special dial. The charger is also equipped with an easy-to-read
display, so you can check the current amperage, voltage and capacity for each
channel at any time. On the screen you will also find information about the
current operation mode and elapsed time. Just take a look! Effective protection
against overheating Don't worry that your battery will overheat and be damaged.
The charger uses an innovative FlexiPulse algorithm that prevents similar
problems! When the device detects that the cell's internal resistance increases
above a certain level during charging, it will automatically reduce the amperage
to maintain the right temperature. In this way, it will protect the battery from
overheating! Run-in function The NC2500 Pro is more than just a charger. The
device offers an additional run-in function. It allows you to run-in model
motors that have not been used for a long time. In this way you will prepare
them for the next races and gain confidence that they will not let you down! Bet
on proven solutions and achieve better and better results. Additional USB port -
fast charging With the NC2500 Pro charger you can also charge your phone in a
short time. The device is equipped with an additional USB port and supports
QC2.0 / QC3.0 fast charging. It also provides voltage and current at 5V / 3A and
9V / 2A. This makes the charger perfect for a variety of scenarios. You no
longer have to wait too long for your smartphone to be ready for use! In the box
BD350 battery discharger / tester XT60 connection cable Brand SkyRC Model NC2500
Pro Input DC 12V / 3A Battery type NiMH / NiCD Battery size AA / AAA Charging
intensity 0.1-2.5A Discharge current 0.1-1.5A Discharge cutoff voltage 0.8-1.0V
(adjustable) USB output QC3.0 5V / 3A, 9V / 2A, 18W max ą5% - ?V: 1-8mV
(adjustable) Current (trickle) 30-99mA / OFF Temperature protection 55-65°C
(adjustable) Operating temperature From 0°C to 40°C Ambient humidity during
operation 0-75% Storage temperature From -10°C to 70°C Ambient humidity during
storage 0-75% Kijelző LCD Méretek 148 x 135 x 65mm Súly 600g