PIR3-RF motion sensor detects and reports motion in your guarded perimeter.
When used in your home security system, it can detect motion within a radius of
8m and you will receive an alert notification on your mobile phone. If you
connect the sensor to a SONOFF camera, you can see who the intruder is. When
included in your Smart Home system, the sensor can turn a light fixture on or
off after connecting it to the RF Bridge. In this way, you can set certain
operating scenarios - for example, which light in the corridor should turn on
when you enter the door. Mounted together with the universal base (PIR3-RFBASE),
the sensor can cover an angle of 360°; horizontally and 90°; vertically,
allowing you to optimally position the sensor according to your needs (the
sensor is not automatic, but manually adjusted). The PIR3-RF has 2 operating
modes: normal operation and notification mode. In notification mode, the sensor
is triggered every 5 seconds when entering its operating range. In normal mode,
it is triggered every 1 minute, after the last motion detection. CONTROL: From
anywhere in the world, using the eWeLink smart app * Note: The sensor cannot
operate and be controlled independently. For this purpose, it needs to be
connected to RFBRIDGER2, which controls it. RFBRIDGER2 is not included in the
price and must be ordered separately. FUNCTIONS: ? Motion sensor + camera: When
adding a camera and connecting it to the sensor, when movement occurs in the
monitored perimeter, you can also receive a visual notification to identify the
infringer. ? Alert Mode/Normal Mode: Two built-in modes, which are two different
timing mechanisms to meet your needs in different scenes. ? Smart Scenes: Set
smart scenes based on your needs, trigger more devices. INSTALLATION: ? Easy
installation: 3M glue or screw mounting (universal connection). ? With universal
base PIR3-RFBASE * the base is not included in the price and must be ordered
separately DIMENSIONS: 40x35x28 mm